THE INDUSTRIAL FLOOR EXPERT             telephone    +36 1 212 7265          mail    Send email           place    63/c Szabó Ilonka Street , Budapest H-1015

facebook     youtube     google plus

For up to £250 Bonus for sports, use our exclusive bet365 Bonus www.abonuscode.co.uk Claim your bonus and start betting at bet365 now.

logo 122x70

EPOPAINT


Purpose

Everlac Epoxy Floor Paint is ideal for use on floor and coving surfaces of factories, garages, schools, showrooms, car parks, warehouses and other similar environments, to give a dustproof, wear and chemical resistant floor finish. It is particularly beneficial where the area for application requires completion in one day.


Special Properties

  • Suitable for a wide range of substrates
  • Easy one pack system
  • Aliphatic (non-yellowing)
  • Chemically resistant
  • Available in clear and four standard colours
  • No priming required
  • Quick drying
  • Easy to clean and maintain
  • Available with Anti-slip Aggregate
  • Method of application

Surfaces to receive Everlac Epoxy Floor Paint must be dry, clean, and free from oil, grease and other contamination and at least 4 weeks old. Smooth concrete should be prepared by light grinding or rotary sanding.

Very smooth surfaces should be etched before coating using a 12% - 15% solution of Hydrochloric Acid followed by a wash with clean water. The first coat should be thinned with 10% white spirit.


Tarmac

New tarmac should be left to harden for 4 weeks (summer) 12 weeks (winter) before coating. The first coat may cause a bleeding reaction with the bitumen, in this case leave to harden sufficiently to create a barrier before applying the 2nd coat.

 


Metal surfaces

Metal surfaces must be fully degreased with a strong solvent such as Xylol. Rusty surfaces and patches must be mechanically abraded feathering back to a sound edge so that at least 20 mm of clean metal is available outside the rust. Galvanised and other special finishes should not be coated without consulting Everlac.


Previously painted surfaces

Excellent adhesion can be achieved on these surfaces although the substrate must be sound and be mechanically prepared. Everlac Epoxy Floor Paint must be stirred thoroughly before and regularly during use. An Anti-slip Aggregate is available. If used this should be added before application and stirred thoroughly whilst applying to avoid settling.


DRYING AND CURING

At 20ºC and in good drying conditions Everlac Epoxy Floor Paint is touch dry in 1 hour and suitable to overcoat in 3 hours. At lower temperatures and poor drying conditions these times will be considerably extended. Always ensure good air movement and ventilation.


COVERAGE

1 litre of Everlac Epoxy Floor Paint will typically cover 8–12m2 per coat on smooth substrates. Coverage will vary according to the nature of the surface being coated. At least two coats are required.


HEALTH & SAFETY

Everlac Epoxy Floor Paint is hazardous and flammable. Strict safety regulations should be adhered to. Goggles and gloves to be worn at all times. Use air fed mask when spraying

 


Technical data  
COLOUR Red, Blue, Green and Grey
STORAGE AND SHELF LIFE 12 months in original sealed containers in dry conditions.
CLEANING EQUIPMENT Clean tools immediately with white spirit
FLASHPOINT 38°C