THE INDUSTRIAL FLOOR EXPERT             telephone    +36 1 212 7265          mail    Send email           place    63/c Szabó Ilonka Street , Budapest H-1015

facebook     youtube     google plus

For up to £250 Bonus for sports, use our exclusive bet365 Bonus www.abonuscode.co.uk Claim your bonus and start betting at bet365 now.

DENSITOP MT


Description

Densitop® MT is a flooring with high wear and impact resistance that can be used in most areas exposed to wear and impact. The flooring can be laid to good level even where the base concrete is somewhat uneven. Densitop® MT consists of a highstrength cement-based dry mortar that mixes with water to an easily worked mortar. It can also be mixed from two components: Densitop® Basic mortar and Densidur Q5 aggregates. Densitop® MT is applied as an 8–12 mm thick layer onto new or existing base concrete. Various colours are available.


Specification

  • The base concrete is prepared by planing, scabbling, and water saturation.
  • The Densitop® MT dry mortar is mixed with water (or Densitop® Basic dry mortar is mixed with water and Densidur Q5 aggregates) in a batch mixer.
  • The mortar is laid and vibrated as a 8-12 mm thick layer.
  • The surface is power-floated.
  • Finally, the surface is sealed with AQUASEAL or by sand saturation.

 

 

Properties

Standard

Value

1 day

7 days

28 days

 

Compressive strength (MPa)

EN 12190

 

55

90

120

 

Flexural strength (MPa)

EN 196

 

8

12

17

 

Wear resistance (cm3/50 cm2)

EN 13892-3

5.5-6

 

 

 

 

Freeze-thaw resistance (kg/m2)

CEN TS 12390-9

< 0,07

 

 

 

 

Impermeability

 

DIN 1048

 

Water penet..
< 1 mm

 

 

 

 

 

Slip resistance

DIN 51130

R 10/R 13

 

 

 

 

Coefficient of expansion

 

EN 1770

 

∝m = 10x10-6/ °C

 

 

 

 

 

 

Fire classification

EN 13501-1

A1f

 

 

 

 

Setting time (hours)

EN 196-3

5-7

 

 

 

 

Density (kg/m3)

EN 12190

2400

 

 

 

 

Cr6+%

 

< 0.0002